COPERTINA SITO

Multi-Angle Saw Series F-AM

Multi-Angle Saw Series F-AM

ADVANTAGES
  • Precision Cutting;
  • Heavy duty construction;
  • Fast cutting;
  • All types of cutting available (transversal, angular and longitudinal);
  • Manual or automatic control system with PLC;
  • Cutting blade electric motor with toothed drive belt;
  • Joystick for the manual control of the machine;
  • Radio Controlled.
The model F-AM saw is used to cut prestressed concrete elements to the desired length directly on the production bed. This model of saw represents the state of the art in the range of cutting machines and has following advantages:
  • New design which is compact and strong to ensure efficient and accurate cutting.
  • When combined with an optional laser device the machine can use the automatic cutting mode and be programmed to perform element cutting on the entire length of the casting bed without any operator intervention.
  • A two part disc protection system makes sure that the disc is always covered during the cutting operation.This reduces to a minimum the level of dirt, and especially the level of noise around the machine.
  • There is the option to mount lateral side shields near the cutting zone to prevent water being sprayed onto the corridors between the beds. (Available only for casting beds fitted with travelling and side edge rails).

Transversal cut (0°)

The machine is stationery on the bed whilst the cutting head cuts transversally across the element.

Longitudinal cut (90°)

The machine cuts the element with the cutting head in a fixed position and with the machine advancing along the bed.

Angular cuts (- 90° < 0 > 90°)

The machine and the cutting head advance in synchronization to create angled cuts.
All the movements of the machine are electronically driven and controlled by the operator using a touch screen panel.

Gallery

Multi-Angle Saw Series F-AM
Multi-Angle Saw Series F-AM
Transversal cut
Transversal cut
Longitudinal cut
Longitudinal cut
Angular cuts
Angular cuts
Operator’s seat position and touch screen panel
Operator’s seat position and touch screen panel
Double protection shield (one mobile and one fixed) for protection when the cutting blade is in operation
Double protection shield (one mobile and one fixed) for protection when the cutting blade is in
Laser guide to project a cutting line on the element
Laser guide to project a cutting line on the element
Water shields (Optional)
Water shields (Optional)
Nordimpianti System Srl
  • Via Erasmo Piaggio, 19/A
    66100 Chieti (CH) - Abruzzo | Italy
    T. +39 0871 540222 - F. +39 0871 562408
  • info@nordimpianti.com
  • PI / VAT No. 01276540687
    • @ 2016 Nordimpianti | All Rights Reserved