ASSURED QUALITY

COMPLETELY SELF-SUPPORTING

The produced elements have high load resistances thanks to a low water/cement ratio of concrete from 0.32 to 0.38. In fact to produce the same profiles using traditional methods would require higher water/cement ratios and need expensive formworks.

Even though the low water/cement ratio employed makes the concrete hard to work, NORDIMPIANTI’s machines have no difficulty producing particular element shapes with a high level of reliability.

EASY PROJECT IMPLEMENTATION

They are very common in the traditional building sector, in prefabricated building construction and also in seismic zones. For this specific purpose the floor elements can be connected to each other using steel reinforcement during construction in order to create floor continuity. This gives the floor the correct static characteristics required for seismic zones.

Through the choice of a different thickness of the lower part of the element, floors can be produced with high fire resistances of up to 180 minutes.

BIG COST SAVING

Large production volumes with uniform cross sections even with different cable reinforcement configurations are possible. Once the concrete elements have been produced they can be removed from the casting beds after just 8-10 hours.

EXCELLENT LOWER SURFACE FINISH

In residential applications only final smoothing is required greatly reducing costs.

PRODUCTION FLEXIBILITY

It is a quick and simple operation to change the necessary parts of the forming insert of the casting machine to vary the height and the thickness of the concrete elements.

For the most demanding applications or when producing high concrete elements, the lower part of the element and the vertical ribs are reinforced with steel mesh and connection bars.

QUICK AND EASY INSTALLATION

HIGH DURABILITY AND LOAD RESISTANCE

The quality of the casting machines ensures a high compaction level and impermeability combined with a high mechanical resistance.