Back TopSlipformer for U panels
The SF Slipformer for U panels is available for the production of elements with widths from 600 mm to 1200 mm and heights from 200mm to 1000mm.
Depending on the height of the U panel there are 2 different 
forming inserts that can be used with a 
universal power unit.
- Forming Insert model u500
for the production of U panels from 200mm up to 500mm; - Forming Insert model u1000
for the production of U panels from 500mm up to 1000mm;
Changing production from one element to another is a quick and simple operation and does not require the use of skilled labour.
The Forming Insert is equipped with two concrete feeders (one front and one rear) to ensure the correct supply of concrete during element casting.
The lower part of the U Panel as well as the vertical ribs are reinforced with 
prestressed cables and steel mesh or 
stirrups for rigidity.
If necessary, the steel mesh or the stirrups can 
protrude from the element ready to be connected with pre-existing on-site reinforcement.
The mechanical, hydraulic and electrical connections between the power unit and the forming inserts are by means of 
quick couplings to minimize downtime time when changing from one product to another.
To produce
concrete topping during construction forms a monolotich block
h 53 mm • Kg/m² 5.08
h 63 mm • Kg/m² 5.63
h 73 mm • Kg/m² 6.18
h 83 mm • Kg/m² 6.72
h 93 mm • Kg/m² 7.27
View more
Gallery
Contact Us